Cisco CCNA (200-301) Labs #2
Lab Summary
0 of 15 Questions completed
Questions:
Information
You have already completed the lab before. Hence you can not start it again.
Lab is loading…
You must sign in or sign up to start the lab.
You must first complete the following:
Results
Results
0 of 15 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
| Average score |
|
| Your score |
|
Categories
- Not categorized 0%
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 15
1. Question
Lab topology
Verify connectivity between the routers R1 f0/0 and R2 f0/0.
-
R1#
R2#
CorrectIncorrect -
-
Question 2 of 15
2. Question
Lab topology
View the dynamically learned MAC addresses on SW2.
-
SW2#
CorrectIncorrect -
-
Question 3 of 15
3. Question
Lab topology
You are connected to the Cisco device R1. Type the command to configure the ip address on the interface FastEthernet0/0 with subnet mask 255.255.25.0. (don’t use abbreviated commands)
-
R1(config)#
R1(config-if)#
R1(config-if)#
CorrectIncorrect -
-
Question 4 of 15
4. Question
Lab topology
You are connected to the Cisco device R1. Type the command to check what routes are in the routing table.
-
R1#
CorrectIncorrect -
-
Question 5 of 15
5. Question
Lab topology
You are connected to the Cisco device R1. Configure a static route to 10.10.20.0/24 with a next-hop address of 10.10.10.2
-
R1(config)#
CorrectIncorrect -
-
Question 6 of 15
6. Question
Lab topology
Type the command to configure the R1 as DNS server for the dojolab.org domain.
-
R1(config)#
R1(config)#
R1(config)#
R1(config)#
CorrectIncorrect -
-
Question 7 of 15
7. Question
You are connected to the Cisco device R1-Dojo. Type the command to verify the ARP cache on R1-Dojo.
-
R1-Dojo#
CorrectIncorrect -
-
Question 8 of 15
8. Question
Lab topology
R3 has just been configured as a server for the dojolab.org domain. Your co-workers have complained that DNS is not operational anymore. From R2, use Telnet to check if the DNS service appears operational on R3.
-
R2#
CorrectIncorrect -
-
Question 9 of 15
9. Question
Lab topology
The FastEthernet1/0 facing R3 is administratively shutdown and the DNS service is not operational, fix the issue.
-
R2(config)#
R2(config-if)#
CorrectIncorrect -
-
Question 10 of 15
10. Question
Enter the following description on the interface fastEthernet F0/0. (don’t use abbreviated commands)
“Link to printer”-
R1(config)#
R1(config-if)#
CorrectIncorrect -
-
Question 11 of 15
11. Question
On SW1 interface f0/1, verify that speed and duplex are automatically negotiated to 100 Mbps full-duplex on the link to R1.
-
SW1#
CorrectIncorrect -
-
Question 12 of 15
12. Question
Type the command to find out what version of IOS is the switch SW1-Dojo running?
-
SW1-Dojo#
CorrectIncorrect -
-
Question 13 of 15
13. Question
Type the command to set the enable secret ‘dojolab’ on the R1-Dojo router.
-
R1-Dojo(config)#
CorrectIncorrect -
-
Question 14 of 15
14. Question
Back up all the changes you made recently on R3 from the running configuration to Flash.
-
R3#
CorrectIncorrect -
-
Question 15 of 15
15. Question
Lab topology
Verify the routes that have been automatically added for the connected and local networks.
-
R1#
CorrectIncorrect -